Creating brass models from scratch using resistance soldering

 

Spec.

Spec.

 

Bob Connors called up one day and asked if “American Beauty” resistance soldering tools could be used for building a 1/16th scale brass model of a soil finisher. His intent was to use (primarily) 1/4″ Brass bar stock for most of the frame-work and knew that an intense and localized heat would be required for soldering this type of mass together. He needed to be able to heat and solder each joint quickly enough so no previous joints could get hot enough to de-solder. Bob knew this was going to be a real challenge because brass is such an excellent conductor of heat. He sent us a schematic design of the soil finisher and we began to discuss resistance soldering equipment and process recommendations that we felt would work best for his special application.

 

724 001e

 

After our initial discussion regarding the high thermal requirements and the accessibility of the intended solder joints, we agreed the best place to start would be the Model 105H9 High Capacity Probe System, with the addition of the Model 105358 Industrial Pliers-Style Handpiece. This worked out very well and as Bob continued working on this project we had some follow up conversations regarding additional soldering tools that could be added to increase the soldering range and capabilities needed to move forward with this project. This would include items like the Model 105227 Industrial Tweezers-Style Handpiece and the Model 10573 3/16″ Carbon Probe-Style Handpiece  for greater accessibility and attaching smaller component parts. As Bobs new resistance soldering system continued growing to meet his needs his 1/16th scale, highly detailed soil finisher drew ever closer to completion.

 

8005

 

We were excited to receive Photograph updates showing Bobs progress as his soil finisher slowly came to life and are now happy to be able to share this project and the final results with you.

 

P1020308

 

 “American Beauty Resistance Soldering”  and “Your Imagination” The results are infinite.

 

P1020309

Comments are closed.