Added to Cart
Model # EC-6
ESICO-ntrol
Product Overview
The MODEL EC6 ESICONTROL® is a separate in-line power controller for soldering irons and solder pots. This unit controls temperature by precisely monitoring power wattage being delivered to the soldering device. Once a desired temperature is under control, the setting on the ESICONTROL® will accurately repeat. Develop the desired control setting by experimentation using thermometer or thermocouple. The control is self-compensating for fluctuations in line voltage and for changes in ambient temperature.
|
$215.00
|
QTY.
ADD TO CART
|
FEATURES AND BENEFITS
The ESICONTROL® range is between 25 percent and 75 percent of the rated wattage of the device heating element. handles any 120 VAC heater load up t 840 watts.
100 percent full wattage is available, but it is not controlled. Less than 25 percent wattage also is not controlled. If an application requires control at such settings, a different wattage soldering iron or solder pot should be used.
Controller is fused and has a pilot light to indicate cycling operations.
Variation is less than 5 percent.
100 percent full wattage is available, but it is not controlled. Less than 25 percent wattage also is not controlled. If an application requires control at such settings, a different wattage soldering iron or solder pot should be used.
Controller is fused and has a pilot light to indicate cycling operations.
Variation is less than 5 percent.
Videos
Setting Up Your American Beauty Industrial Grade Solder Station
Routine maintenance for your Soldering station
Industrial Soldering Station tackles challenging board level job
TECHNICAL SPECIFICATIONS
| Available in a 220-240 VAC? | Not currently available in high voltage version |
| Country of Origin | US |
| RoHS Compliant | Yes |
| WEEE Compliant | Yes |
C of C
Product Data Sheet
